Which Ports do I have to open on my network for my Xhibit Device to connect to XhibitSignage?

The Mvix Xhibit signage system connects to the XhibitSignage content management server over the internet. Typically, this connection is established over a regular HTTP/HTTPS protocol, which is the same protocol that a PC or laptop uses to connect with any website.

Some special, highly-secured corporate firewalls may restrict web-connections and file transfer protocols due to security concerns. Some of these networks may require port-access for Xhibit connections.

Traffic will need to be allowed to www.xhibitsignage.com, which includes the following IP addresses:



The following outbound ports must be open in order to allow access to www.XhibitSignage.com:

--> TCP Port 80  (HTTP)

--> TCP Port 8080  (HTTP)

--> TCP Port 443  (HTTPS)

You will also need to make the following port available for outbound connections to our remote troubleshooting tool:

--> TCP Port 5938  

Please allow access to ntp.ubuntu.com to ensure your time is correct. You will also need to make the following outbound port available to ensure your device's time is correct:

--> UDP Port 123 

To ensure proper and successful security updates please allow outbound access to http://archive.ubuntu.com. This is done over:

--> TCP Port 80 (HTTP)

As long as the device can connect to www.xhibitsignage.com over outbound TCP ports 80, and 443, there are no additional requirements to ensure connectivity.

Problems, Questions, Corrections: If you have any further questions, problems, or corrections you would like to see made, please open a support ticket at www.mvixusa.com/support/