How Do I Get Started with Xhibit?

xhibit signage adding content
  • STEP 1 Plug the HDMI Video Cable into the back of the Xhibit Signage device. Then Plug the other end of the HDMI Video Cable into the rear panel / HDMI port of your LCD TV / Device or Monitor.
  • STEP 2 Connect the Network Cable into the Ethernet port on the back of the Xhibit. Then connect the other end of the Network Cable into your Network switch / router. NOTE: If using WiFi, click here.
xhibit signage adding content
xhibit signage adding content
  • STEP 3 Connect the Power Adapter into the side of the Xhibit and the plug to the wall socket.
  • STEP 4Make sure your Monitor is powered on, then press the power button on the front of the Xhibit. Once the device boots up, an Mvix logo will show up on the screen.
  • Note: Preferably, you will want to mount the device behind the display. Once the device and TV are powered on and are displaying the Mvix logo, you're ready to begin controlling your device online using the web-based content management system, Check out the links below to see where to go from here!

For more information please view the following video:

Next Steps

Problems, Questions, Corrections: If you have any further questions, problems, or corrections you would like to see made, please open a support ticket at